-
PEEK/PPS/PI/PES/PSU Advanced Material plastic Plate, pipe, sheet extrusion line
As a kind of high performance engineering material, polyphenylene sulfide (PPS) has many advantages in performance .
The main technical characteristicsProduct line includes high efficiency high pressure single screw extruder, drawing board, damping machine and cutting machine, using the special designed screw and machine Jane
-
Co-rotation parallel Twin-screw Pelletzing line
Parallel co-direction twin-screw extrusion system:
Screw, cylinder adopts “building block” structure, with good interchangeability, that piece of bad change that piece, not to the cone double screw as long as there is a little flaw to replace the whole root. Can be arbitrarily combined according to the different material processing technology; Cylinder selection of nitride steel, bimetallic materials, wear-resistant, Corrosion resistance, prolong service life; The thread element selects nitride steel, high speed steel, with unique processing technology, so as to ensure the normal teeth of the thread working section
-
HDPE PP Double Wall Corrugated Pipe Production Line
Double wall corrugated pipe is mainly used for water drainage system. It is fully computer controlled line. It features high and stable output capacity, and highly automatic operation. For PE and PP, you can choose high efficient single or double screw extruder. For PVC, you can choose conical twin-screw extruder or parallel twin-screw extruder. Forming system consists of mould and corrugator. Mould blocks can be easily changed and they have air or water cooling system. The belling process is on line. High precision cutting can be guaranteed by cutting machine. The production line can also be equipped with SIEMENS PLC system.
-
PVC CPVC Soild Extrusion Pipe
The material is the largest cost component in the manufacturing of plastic pipe, around 80 %. This fact makes it worthwile to reduce overweight, while keeping the pipe in the required specifications.SUPX offers several types of cost saving solutions to control the quality of the pipe during production. These solutions are compatible with all existing brands of equipment.
-
Special Winding Reinforced Pipe Extrusion Line
This Reinfore pipe extrusion line can solve the problems of high temperature melting, high viscosity, easy-decomposition. The special designed screw, gearbox, tooling, and HMI system make the line reliable and easily operated.It widly use for the High press area ,like the Gas pipe , high pressure water pipe and the Oil pipe use . Flexible Composite Pipes (FCP) are the next generation in high pressure pipelines. The SoluForce system is corrosion-, scaling and maintenance free, and suitable for a wide range of applications, making it the 21st century pipeline solution. SoluForce is the technological leader in manufacturing Spoolable Flexible Composite Pipes (FCP), also known as Reinforced Thermoplastic Pipes (RTP)
-
PVC Plastic Extrusion Foam Sheet Board Line
1.PVC skining foaming board extrusion line adopts Celuka foaming technology. Compared with PVC free foaming board , pvc skining foaming board not only has more smooth surface, but also the hardness is better.
2.In addition, mechanics performance of skining foaming board is better than that of free foaming board. PVC skining foaming board extrusion line is composed of conical twin-screw extruder, die , vacuum calibration unit , haul-off unit and so on. -
Polyurethane Continuous Separate Spray Winding Production Line
The spray winding insulation pipe is composed of steel pipe (working pipe) for transmission medium, polyurethane rigid foam (insulation pipe), and high-density polyethylene outer casing (outer sheath). Polyurethane spraying uses urethane spraying equipment to continuously spray the evenly mixed polyurethane raw materials on the outer surface of the steel pipe to form a polyurethane thermal insulation layer. Polyethylene winding uses extrusion equipment to continuously wind the molten polyethylene sheet outside the polyurethane thermal insulation layer. Surface, the process of forming a continuous and dense polyethylene outer sheath. Because of its low heat loss, good anti-corrosion and insulation performance, fast and safe construction, etc., it is widely used in liquid and gas transportation pipe networks, central heating networks, and is recognized as an environmentally friendly and energy-saving product. Polyurethane direct buried thermal insulation pipe is suitable for thermal insulation and cold insulation projects of various media in the range of -50 C to 150 C. Prefabricated directly buried thermal insulation pipes not only have advanced technology and practical performance that are difficult to compare with traditional trenches and overhead laying pipes, but also have significant social and economic benefits, and are also a powerful measure for heating and energy saving.
-
Large Diameter HDPE PP Pipe Extrusion Line
The Large Diameter HDPE/PP Pipe Extrusion Line research & developed by Suzhou oriplas machinery co.,Itd features of unique structure, easily control, highly automation and stable performance. Pipes produced by this machine has the moderate rigidity, strength, as well as good flexibility, anti-corrosion, anti-stress split, and favorable hot melting, make this large diameter pipe considered as the prefer product for water and gas transportation system in cities.
-
One step Breathable film line
The production line use PE air-permeable plastic granuels as raw material, and uses extrusion casting method tomelt-extrude the PE-modified air-permeable plastic granuels containing inorganic filler through a flat die and the roller isstretched at a high rate to produce a sub-nanometer micro Porous membrane.
This new technology is update the two step into one step , instead of before need make the composite material first , now can be directly to make the film, save the cost and electrical power.
