Personlized Products Drip Mold - PVC Stabilizer – SuperX
Personlized Products Drip Mold - PVC Stabilizer – SuperX Detail:
Advantage
What are the advantages of calcium and zinc complex stabilizer that make it stand out? Here’s a look:
1. Calcium and zinc complex stabilizer green environmental protection without heavy metal elements (lead, isolation), can meet the new environmental standards (such as the European Union RHOS directive, REACH directive, etc.) standards.
2. Calcium zinc composite stabilizer vulcanization resistance pollution in the field of PVC doors and Windows profiles, the use of calcium zinc composite stabilizer in parts of the north of China (a large number of use of sulfur coal caused by acid rain) prone to black phenomenon, and calcium zinc heat stabilizer will not be polluted.
3. Good system switching characteristics of calcium and zinc complex stabilizer.
4. Low density, can appropriately increase the amount of calcium carbonate, reduce the cost.
PVC Foam Regulating Agent
PVC foam regulating agent is factly a kind of PVC processing aids ,it concludes all performances that PVC processing aids has .The only difference is the molecule weight ,its molecule weight is much higher than PVC processing aids.
PVC foam product,the destination in which macromolecule polymer is added , on one hand it is promote PVC plasticize ,on the other hand it is improve melt strength . so as to get good appearance foam product .As different factory has different equipment ,process ,raw material and lubrication system ,as well as product ,we could our company study center can aupply good processing condition and dosage
[ technique index]
| TYPE | Intrinsic viscosity( η) | Volatile matter(%) | Apparent density(q/cm3) | Passing rate of 40 mesh fineness(%) |
| SP-400 | 11.0-12.0 | 1.3 | 0.30-0.50 | 98 |
| SP-30(530A) | 10.5-11.5 | 1.3 | 0.30-0.50 | 98 |
| SP-80 | 11.0-12.0 | 1.3 | 0.30-0.50 | 98 |
| SP-90 | 10.5-11.5 | 13. | 0.30-0.50 | 98 |
| SP-50 | 10.5-11.5 | 1.3 | 0.30-0.50 | 98 |
principle for Foam agent choice
a .PVC in different degree polymerization ,such as PVC-700, PVC-800, PVC-1000 ,must use different foam agent .
b. suitable melted speed
c. full melt strength
d. good melt flow
e. note blance of inside and outside lubricating
f. different product ,such as foam board,foam slab ,foam sheet ,plastic foam board ,lead to plastic foam board ,ect should use different foam regulating agent .
Product detail pictures:
Related Product Guide:
owing to very good support, a variety of high quality merchandise, aggressive costs and efficient delivery, we love an excellent name among the our clients. We are an energetic company with wide market for Personlized Products Drip Mold - PVC Stabilizer – SuperX , The product will supply to all over the world, such as: Kuwait, Greenland, Chile, Our team knows well the market demands in different countries, and is capable of supplying suitable quality products and solutions at the best prices to different markets. Our company has already set up a experienced, creative and responsible team to develop clients with the multi-win principle.
By Giselle from New Zealand - 2017.03.28 12:22
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Jean Ascher from Armenia - 2017.03.08 14:45
